Modular L3 Ethernet Switch User's Guide
Figure 6- 88. IP Router Interface Parameters Edit window
The IP Router Interface Parameters Edit window contains the following buttons that define
additional parameters:
ICMP Parameters – Defines the ICMP parameters for IP interface
RIP Parameters – Defines the RIP parameters for IP interface
OSPF Parameters – Defines the OSPF parameters for IP interface
3.
Edit the fields required, except the IP Address field.
4.
Press the ICMP Parameters button and complete the ICMP Interface Parameters
window fields.
5.
Press the RIP Parameters button and complete the RIP Interface Table Edit window
fields.
6.
Press the OSPF Parameters button and complete the OSPF Interface table fields.
7.
Click
to confirm the new IP Interface.
8.
Close the IP Router Interface Parameters Edit window.
To delete a device IP interface:
1.
Display the IP Router Interface Parameters window.
2.
Select an entry in the table.
127