D-Link DES-6300 User Manual page 194

Modular L3 Ethernet Switch User's Guide
The IGMP Filter Table displays the following fields:
IfIndex – Identifies the port number for which the IGMP filter is enabled.
From Address – Indicates the IP address being filtered from.
To Address – Indicates the IP address being filtered to.
Up Time – Indicates in ticks the amount of time that has passed since the entry
was created.
Action – This parameter is used to fine-tune the IGMP filter.
Permit – Whether the indicated packets should be forwarded.
•
Deny – Whether the indicated packets should be blocked.
•
To add an IGMP Filter entry:
1. Display the IGMP Filter Table.
2. Click . The IGMP Filter Entry - Insert window opens:
Figure 6- 143. IGMP Filter Table window
185