Modular L3 Ethernet Switch User's Guide
Figure 6- 87. IP Router Interface Parameters Insert window
3.
Enter the IP Address and Network Mask as determined by the network setup.
4.
Select an interface number from the Interface Number list. This list contains all physical
interfaces and all IP VLANs. If a required physical interface combination is not listed,
use the VLAN Table to define the desired combination.
5.
Click
to confirm the new IP Interface.
6.
Repeat steps 2-5 for all new IP interfaces.
To edit a device IP interface:
1.
Display the IP Router Interface Parameters window.
2.
Select an entry and click
opens:
. The IP Router Interface Parameters Edit window
126