D-Link DES-6300 User Manual page 228

Modular L3 Ethernet Switch User's Guide
The IPX SAP Table displays the following parameters:
Server Name – Server type and server name to identify a server. The name can
include up to 47 characters.
Network – Network portion (eight hexadecimal digits) from the IPX server
address.
Server Address – Node portion 12 hexadecimal digits) from the IPX server
address.
Socket – Socket portion up to four hexadecimal digits) from the IPX server
address.
Server Type – Type of service (assigned by Novell) provided by the server.
Hops to Server – Number of hops on the route to the server, as determined by the
IPX SAP routing algorithm.
Protocol Type – The information source protocol.
Static – User-defined entry (SNMP)
•
SAP – SAP protocol.
•
Status – Defines whether the SAP interface is active. OFF is inactive but not
deleted.
To add an IPX SAP Table entry:
1. Display the IPX SAP Table.
2. Click . The IPX Routing Table Insert window opens:
Figure 6- 176. IPX SAP Table window
219