D-Link DES-6300 User Manual page 203

Modular L3 Ethernet Switch User's Guide
PIM IPM Route Next Hop
The PIM IPM Route Next Hop window contains the next-hops information of IP multicast
packets. The PIM IPM Route Next Hop contains an entry for each outgoing interface listed in
the multicast routing table running PIM, and whose state is pruned.
To display the PIM IPM Route Next Hop table:
Select Router > IPM > PIM > Route Next Hop, the PIM IPM Route Next Hop window opens:
Figure 6- 152. PIM IPM Route Next Hop window
The PIM IPM Route Next Hop window displays the following fields:
Group – Specifies the IP address of the next-hop multicast group.
Source – Specifies the source IP address of the multicast packet.
Source Mask – Masks all or part of the source IP address.
IfIndex – Identifies the outgoing port.
Next Hop Address – The IP address of the next-hop.
Prune Reason – Indicates the reason the downstream interface was pruned. The
possible values are:
Prune – Indicates that the downstream interface was pruned in response to
•
a prune message.
Assert – Indicates that the downstream interface was pruned due to PIM
•
assert processing.
194