D-Link DES-6300 User Manual page 226

Modular L3 Ethernet Switch User's Guide
The Select Circuit window displays the following parameters:
Circuit Number – The IPX circuit number.
Network Address – The IPX circuit network address.
3. Select an entry in the table.
4. Click .
5. Close the Select Circuit window. IPX Routing Table Insert window opens.
6. Complete the fields.
7. Click .
8. Close the IPX Routing Table Insert window. The IPX Routing Table opens.
9. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
To edit an IPX Routing Table entry:
1. Display the IPX Routing Table.
2. Select an entry in the table.
3. Click . The IPX Routing Table Edit window opens:
Figure 6- 174. Select Circuit window
217