D-Link DES-6300 User Manual page 274

Modular L3 Ethernet Switch User's Guide
The Device Tuning window General tab displays the following parameters:
Bridge Forwarding Table – Maximum number of entries (MAC addresses)
possible for this table.
RMON Log Table – The number of log entries the device keeps in the table
before overwriting the first entry. It is kept until the device is reset.
Max GVRP VLANS – Indicates the maximum number of VLANs that can
currently participate in GVRP.
Note: If the maximum number of VLANs is decreased, the number should still be greater than
the number of MAX GVRP VLANs.
MAX Policy Simple MIB Max Rules Entries – Indicates the maximum number
of policy entries.
MAX Policy Simple MIB Max Profile Entries – Indicates the maximum
number of profile entries.
Max VLANs Entries – Indicates the maximum number of VLANs entries.
Error Report Level – (0 to 255) Determines the amount of errors sent to the
terminal. 0 sends the least amount of errors and 255 sends the most.
To display the Device Tuning window IP tab:
1. Display the Device Tuning window's General tab.
2. Select the IP tab. The IP tab opens:
265