D-Link DES-6300 User Manual page 181

Modular L3 Ethernet Switch User's Guide
The VRRP Association Table contains the following fields:
IfIndex—Specifies the interface to which the VRRP ID and IP address is attached.
VRID—Identifies the Virtual Router Identifier attached to the selected interface.
IP Address—Indicates virtual router IP address that is attached to the interface.
Adding a VRRP Interface:
1. Open the VRRP Association Table.
2. Click
Figure 6- 131. vrrpAssoIpAddrEntry – Insert window
3. Define the IfIndex, VRID, and IP Address fields.
Figure 6- 130. VRRP Association Table
. The VRRP AssoIPAdrrEntry – Insert window opens.
172