D-Link DES-6300 User Manual page 186

Modular L3 Ethernet Switch User's Guide
The TCP Connections Table window displays the following parameters:
Local Address – Indicates the local IP address for this TCP connection. IF the
connection in the Listen state, the value 0.0.0.0 is used. The device accepts
connections for any IP interface associated with the node.
Local Port – Indicates the local port number for this TCP connection.
Remote Address – Indicates the remote IP address for this TCP connection.
Remote Port – The remote port number for this TCP connection.
Connection State – Indicates the status of this TCP connection. The only value
set by a management station is DeleteTCB (TCP Control Block). This is done by
deleting the specific entry using the management system.
To delete a TCP Connection Table entry:
1. Display the TCP Parameters window.
2. Select an entry in the table.
3. Click . The entry is deleted.
4. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
Figure 6- 135. TCP Connections Table window
177