D-Link DES-6300 User Manual page 275

Modular L3 Ethernet Switch User's Guide
The IP tab displays the following parameters:
IP RIP table – Maximum number of routing table entries allowed for this table.
ARP Forwarding table – Maximum number of entries allowed for this table.
Max IP FFT Entries – Maximum number of IP Fast Forwarding table entries
allowed.
Max IP System Entries – Maximum number of IP entries that can be entered
into the system.
IP FFT Upper Limit (percents) – Maximum percentage of entries that the
device can hold in FFT without overflowing.
IP FFT Lower Limit (percents) – Minimum percentage of entries in which the
device would stop the overflowing process.
To display the Device Tuning window IPX tab:
1. Display the General tab.
2. Select the IPX tab. The IPX tab opens:
Figure 6- 219. Device Tuning window IP tab
266