D-Link DES-6300 User Manual page 219

Modular L3 Ethernet Switch User's Guide
irrelevant. In this example, only SAP messages with the numbers 1234 as
their first four digits are affected.
Service Type – Type in the type of server (in hex) the filter entry affects, such as
file server or print server. Value 0xFFFF applies for all types of service and is the
default.
Service Name – Type in the server name the filter entry affects. An asterisk (*) at
the end of the name as a wildcard designates any number of characters.
For example, * indicates any server name, and sh* indicates any server
name starting with sh. The name may be up to 47 characters
Action – Defines whether the indicated packets are to be forwarded (permit) or
blocked (denied) when the current filter entry conditions are met. This parameter is
used to fine-tune other filter entries.
For example, a filter entry can be set to block all SAP messages with a
network pattern starting with 123, and set another filter entry to permit all
SAP messages with a network pattern starting with 1234. all SAP
messages with a network pattern starting with 123 that do not have 4 as
the fourth digit are blocked.
The default is forward, but the default can be set by creating a general
filter entry with the network mask 00000000, and setting it to permit or
deny.
To add a SAP Global filter:
1. Display the SAP Global Filter Table.
2. Click . The SAP Global Filter Insert window opens.
210