Suzuki GSF650A Service Manual page 232

1D-20 Engine Mechanical:
16) Disengage the gearshift lever link arm by removing
the bolt.
NOTE
Mark the gearshift shaft head at which the
gearshift link arm slit set for correct
reinstallation.
17) Move the engine sprocket inner cover (10).
18) Remove the clutch push rod (11).
19) Remove the speed sensor rotor (12) while
depressing the rear brake pedal.
20) Remove the engine sprocket nut (13) while
depressing the rear brake pedal.
21) Remove the washer (14).
11
13
22) Loosen the rear axle nut (15) and chain adjuster
bolts (16) to provide additional chain slack.
15
16
10
I717H1140045-01
14
12
I717H1140046-01
16
I717H1140047-02
23) Remove the engine sprocket (17).
24) Disconnect the ECT sensor coupler (18), CKP
sensor coupler (19) and generator coupler (20).
19
20
25) Disconnect the engine ground wire coupler (21) and
starter motor lead wire (22).
21
26) Disconnect the GP switch coupler (23) and oil
pressure switch lead wire (24).
23
17
I717H1140048-01
18
I717H1140049-01
22
I717H1140050-01
24
I717H1140051-01