Suzuki GSF650A Service Manual page 243

• Install the camshaft journal holders.
CAUTION
!
Damage to head or camshaft journal holder
thrust surfaces may result if the camshaft
journal holders are not drawn down evenly.
NOTE
Each camshaft journal holder is identified
with an embossed letter.
A
C
• Fasten the camshaft journal holders evenly by
tightening the camshaft journal holder bolts lightly, in
the ascending order of numbers.
CAUTION
!
The camshaft journal holder bolts are made
of a special material and much superior in
strength, compared with other types of high
strength bolts.
Take special care not to use other types of
bolts.
NOTE
The ascending order of numbers are
indicated on the camshaft journal holders.
• Tighten the camshaft journal holder bolts in the
ascending order of numbers to the specified torque.
Tightening torque
Camshaft journal holder bolt: 10 N·m (1.0 kgf-m,
7.0 lbf-ft)
B
FWD
D
I717H1140091-01
• Install the oil pipe (1) and tighten the mounting bolts to
specified torque.
NOTE
Fit the washer to each oil pipe mounting bolt.
Tightening torque
Oil pipe mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-
ft)
Cam Chain Tension Adjuster
• Retract the push rod by pushing the stopper (1).
• Install a new gasket (2).
CAUTION
!
Use a new gasket to prevent oil leakage.
Engine Mechanical: 1D-31
1
I717H1140092-01
1
I718H1140070-03