Clutch Hose Routing Diagram
1. Wiring harness
2. Clutch hose
3. Guide (GSF650S only)
4. Frame
5. Clutch hose clamp
: Insert the clutch hose clamp end to the hole of the frame fully.
6. Clutch hose No.2 clamp
: After positioning the clamp with stopper, tighten the bolt.
7. Clutch hose
: Pass through the clutch hose under the frame.
8. Union bolt
: After the clutch hose union has contacted the stopper, tighten the union bolt.
Schematic and Routing Diagram
1
3
2
8
(a)
1
2
4
10
5
9
"A"
8
(a)
9. Clutch hose No.3 clamp
: After positioning the clamp with stopper, tighten the bolt.
10. Grommet
: Install the grommet of the clutch hose to the clutch hose guide
properly.
"A": Pass the wiring harness through upper the clutch hose No.3 clamp.
"B": Clutch hose
: Pass through the clutch hose between the frame and fuel tank rail.
Be careful not to contact the clutch hose and frame cover bracket.
"C": pass the clutch hose through outside of the frame.
"D": Pass the clutch hose through outside of the wiring harness.
: 23 N⋅m (2.3 kgf-m, 16.5 lb-ft)
Clutch:
B817H25302001
7
6
"B"
"C"
"D"
30
I718H1530005-05
5C-2