Front Wheel Assembly Removal and Installation
(GSF650A/UA/SA/ASUK7)
Removal
1) Remove the front wheel speed sensor by removing
the mounting bolts. Refer to "Front Wheel Speed
Sensor Removal and Installation in Section 4E
(Page 4E-70)".
2) Remove the brake calipers. Refer to "Front Brake
Caliper Removal and Installation in Section 4B
(Page 4B-2)".
CAUTION
!
Do not operate the brake lever while
removing the caliper.
3) Loosen the axle pinch bolt (1).
4) Remove the front axle (2) using the special tool.
Special tool
: 09944–28320 (Hexagon socket (19 mm))
2
B817H22406017
I717H2240005-01
1
I717H2240006-01
5) Raise the front wheel off the ground and support the
motorcycle with a jack or a wooden block.
CAUTION
!
Do not carry out the work with the
motorcycle resting on the side-stand. Do not
support the motorcycle with the exhaust
pipes. Make sure that the motorcycle is
supported securely.
6) Draw out the front axle and remove the front wheel.
NOTE
After removing the front wheel, fit the
calipers temporarily to the original positions.
7) Remove the collar (3) and front wheel speed sensor
bracket (4).
Wheels and Tires:
2D-20
3
I717H2240007-01
4
I717H2240008-01