4E-1 ABS:
ABS
Brake
Precautions for ABS
Refer to "Precautions for Electrical Circuit Service in
Section 00 (Page 00-2)".
ABS Information
WARNING
!
• Be sure to bleed air from the brake fluid
circuit when the brake is felt spongy or
when a brake relating part is replaced.
• Never ride the motorcycle before bleeding
the air.
Wheel Speed Sensor Description
Wheel speed sensor consists of wheel speed sensor (1) and sensor rotor (2).
Precautions
• Be sure to route the brake hoses correctly.
B817H24500001
• The ABS does not shorten the motorcycle's braking
distance. When riding down slopes or on wet or
bumpy roads the braking distance is lengthened as
compared to a motorcycle without ABS. In addition,
braking distance increases more, when the road is
B817H24500002
slippery.
• The ABS does not control slides which may occur
when braking while turning. As with a motorcycle that
does not have ABS, it is best not apply the brakes
while turning.
• The brake levers may move by themselves when they
are applied. This is not a malfunction.
• Only use the specified tires.
General Description
Front
1
Rear
1
2
2
I717H2450001-01
I717H2450002-01
B817H24501001