Dtc Table - Suzuki GSF650A Service Manual

4E-33 ABS:
NOTE
• Inspect the rear brake in the same manner of front brake.
• If the ABS does not function, the cause may lie in the ABS control unit/HU.
• In checking the rear brake at the time of pressure reduction drive (4/7), "brake lever" appears on the
screen. This is because the present screen shares with other model having front brake only.
Therefore, in the case of rear brake pedal equipped vehicle, ignore this instruction and operate the
rear brake pedal.
7) Close the SDS tool and turn the ignition switch OFF.
8) Disconnect the SDS tool and install the right frame cover.

DTC Table

DTC
None Normal
13 (C1613) Wheel speed sensor rotor malfunction (F)
14 (C1614) Wheel speed sensor rotor malfunction (R)
22 (C1622) ABS actuator circuit malfunction (F)
23 (C1623) ABS actuator circuit malfunction (R)
25 (C1625) Wheel speed sensor related malfunction
35 (C1635) ABS motor malfunction
41 (C1641) Wheel speed sensor signal malfunction (F) *
42 (C1642) Wheel speed sensor circuit open (F) *
Return
Malfunction cause
2
Finish Cancel
Indicator
status
ON * 1
Refer to "DTC "13" (C1613): Wheel
ON Speed Sensor Rotor Malfunction (F)
(Page 4E-35)".
Refer to "DTC "14" (C1614): Wheel
ON Speed Sensor Rotor Malfunction
(R) (Page 4E-37)".
Refer to "DTC "22" (C1622): ABS
ON Actuator Circuit Malfunction (F)
(Page 4E-39)".
Refer to "DTC "23" (C1623): ABS
ON Actuator Circuit Malfunction (R)
(Page 4E-40)".
Refer to "DTC "25" (C1625): Wheel
ON Speed Sensor Related Malfunction
(Page 4E-42)".
Refer to "DTC "35" (C1635): ABS
ON
Motor Malfunction (Page 4E-44)".
Refer to "DTC "41" (C1641): Wheel
2 ON Speed Sensor Signal Malfunction
(F) (Page 4E-46)".
Refer to "DTC "42" (C1642): Wheel
ON Speed Sensor Circuit Open (F)
(Page 4E-47)".
Help
I718H1450062-01
B817H24504008
Reference
—