Suzuki GSF650A Service Manual page 276

1D-64 Engine Mechanical:
Water Pump
• Apply SUZUKI SUPER GREASE to the O-ring.
CAUTION
!
Replace the O-ring with a new one.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Tighten the water pump mounting bolts to the special
torque.
(a)
Tightening torque
Water pump mounting bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
Water Hose
• Connect the water hose (1). Refer to "Water Hose
Routing Diagram in Section 1F (Page 1F-3)".
Starter
• Install the starter component parts (1). Refer to
"Starter Clutch Removal and Installation in Section 1I
(Page 1I-10)".
Generator
• Install the generator component parts (1). Refer to
"Generator Removal and Installation in Section 1J
I717H1140173-01
(Page 1J-4)".
I717H1140174-02
Gearshift
• Install the gearshift cam stopper (1), bolt (2), washer
(3) and return spring (4).
NOTE
Hook the return spring end "A" to the
stopper (1).
• Tighten the gearshift cam stopper bolt to the special
torque.
Tightening torque
Gearshift cam stopper bolt (a): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
1
I717H1140209-01
1
1
I717H1140175-01
I717H1140176-02