Cam Chain Guide Removal And Installation; Cam Chain Guide Inspection; Cam Chain Tensioner Inspection - Suzuki GSF650A Service Manual

2) Check that the push rod slides smoothly when
releasing stopper (1). If it does not slide smoothly,
replace the cam chain tension adjuster with a new
one.
1
3) Install the cam chain tension adjuster. Refer to
"Engine Top Side Assembly (Page 1D-26)".

Cam Chain Guide Removal and Installation

Removal
1) Remove the cylinder head cover. Refer to "Engine
Top Side Disassembly (Page 1D-24)".
2) Remove the cam chain No.2 guide (1) from the
cylinder head cover.
3) Remove the cylinder head. Refer to "Engine Top
Side Disassembly (Page 1D-24)".
4) Remove the cam chain No.1 guide (2).
I718H1140091-01
B817H21406024
1
I718H1140092-01
2
I717H1140104-01
Installation
Install the cam chain guides in the reverse order of
removal.

Cam Chain Guide Inspection

Inspect the cam chain guide in the following procedures:
1) Remove the cam chain No.1 and No.2 guides. Refer
to "Cam Chain Guide Removal and Installation
(Page 1D-37)".
2) Check the contacting surface of the cam chain
guide. If it is worn or damaged, replace it with a new
one.
3) Install the cam chain No.1, No.2 guides. Refer to
"Cam Chain Guide Removal and Installation
(Page 1D-37)".

Cam Chain Tensioner Inspection

Inspect the cam chain tensioner in the following
procedures:
1) Separate the crankcases, upper and lower. Refer to
"Engine Bottom Side Disassembly (Page 1D-51)".
2) Remove the crankshaft assembly from the upper
crankcase. Refer to "Engine Bottom Side
Disassembly (Page 1D-51)".
3) Remove the dampers (1) of the cam chain tensioner
and cam chain tensioner (2).
2
Engine Mechanical: 1D-37
B817H21406025
I718H1140095-01
B817H21406026
1
I718H1140096-01