Cam Chain Tension Adjuster Inspection
The cam chain tension adjuster is maintained at the
proper tension by an automatically adjusted.
1) Remove the cam chain tension adjuster. Refer to
"Engine Top Side Disassembly (Page 1D-24)".
2) Check that the push rod slides smoothly when
releasing stopper (1). If it does not slide smoothly,
replace the cam chain tension adjuster with a new
one.
1
3) Install the cam chain tension adjuster. Refer to
"Engine Top Side Assembly (Page 1D-28)".
Cam Chain Guide Removal and Installation
Removal
1) Remove the cylinder head cover. Refer to "Engine
Top Side Disassembly (Page 1D-24)".
2) Remove the cam chain No.2 guide (1) from the
cylinder head cover.
B718H11406012
I718H1140091-01
B718H11406013
1
I718H1140092-01
3) Remove the cylinder head. Refer to "Engine Top
Side Disassembly (Page 1D-24)".
4) Remove the cam chain No.1 guide (2).
Installation
Install the cam chain guides in the reverse order of
removal.
Cam Chain Guide Inspection
Inspect the cam chain guide in the following procedures:
1) Remove the cam chain guides. Refer to "Cam Chain
Guide Removal and Installation (Page 1D-39)".
2) Check the contacting surface of the cam chain
guide. If it is worn or damaged, replace it with a new
one.
3) Install the cam chain guides. Refer to "Cam Chain
Guide Removal and Installation (Page 1D-39)".
Engine Mechanical:
1D-39
2
I718H1140056-02
B718H11406014
I718H1140095-01