Copy Control - Xerox WorkCentre 7132 User Manual
Hide thumbs
Also See for WorkCentre 7132:
- Service documentation (1726 pages) ,
- User manual (468 pages) ,
- System administration manual (184 pages)
Table of Contents
Advertisement
10 Setups
Build Job - Separators Tray
Copy Control
Memory Full Procedure
Maximum Stored Pages
Auto Paper Off
Mixed Sized Originals - 2 Sided Copy
Fine-tune 100%
Background Suppress (Photo & Text)
244
Downloaded From ManualsPrinter.com Manuals
Specifies the default for [Copy Job]>[Chapter Start]>[Separators Tray] of the [Build
Job] feature on the [Job Assembly] screen.
This feature allows you to implement operational control of the various copy features.
1.
Select [Copy Control] on the
[Copy Mode Settings] screen.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Specifies the default process to execute if the hard disk becomes full while reading
documents. A message asking how to process the data read up to that point is
displayed. You can predefine a processing method to be performed after the message
has been displayed for a specified period. If you select [Cancel Job], the data will be
discarded. If you select [Run Job], the data read up to that point will be processed.
Specifies the maximum number of pages that can be stored in memory when you copy
documents. Select a number in the range from 1 to 999.
Specifies the paper tray used when you cancel [Auto] in the [Paper Supply] feature by
selecting [Auto %] or [Independent X-Y%] in the [Reduce/Enlarge] feature.
Specifies the copy operation when a different paper size is detected when making 2
sided copies from mixed sized originals. Select [Copy to new sheet] to print to a new
page. Select [Copy to Side 2] to copy onto the reverse side of the current page.
NOTE: Some areas of the image may be cropped if you select [Copy to Side 2].
Specifies the actual magnification ratio for making copies on the document glass when
[100%] is selected on the [Reduce/Enlarge] screen. Fine tune the value in the range of
98.0 to 102.0%.
Specifies the background suppression level for the [Image Enhancement] feature when
[Photo & Text] is selected on the [Original Type] screen when making color copies.
Xerox WorkCentre 7132 User Guide
Advertisement
Table of Contents
