FRONT BRAKE
MASTER CYLINDER ASSEMBLY
WARNING
All internal parts should be cleaned in
new brake fluid only.
Internal parts should be lubricated with
brake fluid when installed.
Recommended brake fluid:
DOT 4
Replace the piston seals and dust seals
whenever a brake master cylinder is dis-
assembled.
1.Install:
Brake master cylinder kit 1
Circlip 2
Dust boot 3
2.Install:
Brake master cylinder 1
CAUTION:
Install the brake master cylinder holder
with the "UP" mark facing upward.
Align the end of the brake master cylinder
holder with the punch mark a in the han-
dlebar.
Tighten first the upper bolt, then the
lower bolt.
Bolt (brake master cylinder holder):
7 Nm (0.7 m • kg, 5.1 ft • lb)
– 34 –
CHAS