Oil Pump And Shifter - Yamaha YFM250XL(C) Service Manual

ENGINE DISASSEMBLY
9.Straighten:
Lock washer tab 1 (clutch boss)
10.Remove:
Nut 2 (clutch boss)
NOTE:
Hold the clutch boss 3 by the Rotor Holder
4 to loosen the nut.
Rotor holder:
P/N. YU-01235, 90890-01235
11.Remove:
Lock washer 1
Clutch boss 2
Friction plates 3
Clutch plates 4
Pressure plate 5
Washer 6
Clutch housing 7

OIL PUMP AND SHIFTER

NOTE:
With the engine mounted, the oil pump
assembly can be maintained by removing
the following parts:
Starter motor
Crankcase cover (right)
Primary and secondary clutches
Crankcase spacer (right)
1.Remove:
Crankcase spacer 1 (right)
Dowel pins 2
Gasket 3
2.Remove:
Oil pump assembly 1
Gasket
4 - 13
ENG
4