1 Cable guide
2 Main switch
3 Fuel tank breather hose
4 Rectifier/regulator
5 CDI unit
6 Taillight
7 Final gear case breather hose
8 Carburetor overflow hose
9 Reverse switch lead
0 Neutral switch lead
A Starter motor lead
2
CABLE ROUTING
B Throttle cable
C Rear brake cable
D Rear brake breather hose
E Carburetor air vent hose
F CDI magneto lead
Å Route the main switch lead and indicator light lead to the side
of the cable guide.
ı Insert the hoses into the air duct after routing them through
the fuel tank grommet.
Ç Fasten the neutral switch lead and reverse switch lead only.
2 - 26
SPEC