Tire Inspection - Yamaha YFM250XL(C) Service Manual

TIRE INSPECTION

TIRE INSPECTION
WARNING
This model is equipped with low pressure
tires. It is important that they be inflated
correctly and maintained at the proper
pressures.
TIRE CHARACTERISTICS
1) Tire characteristics influence the han-
dling of ATV's. The tires listed below
have been approved by Yamaha
Motor Co., Ltd. for this model. If other
tire combinations are used, they can
adversely affect your machine's han-
dling characteristics and are therefore
not recommended.
Manufacturer
Front CARLISLE
Front DUNLOP
Rear CARLISLE
Rear DUNLOP
TIRE PRESSURE
1) Recommend tire pressure
Front 20 kPa (0.20 kgf/cm
Rear 25 kPa (0.25 kgf/cm
2) Tire pressure below the minimum
specified could cause the tire to dis-
lodge from the rim under severe riding
conditions.
The following are minimums:
Front 17 kPa (0.17 kgf/cm
Rear 22 kPa (0.22 kgf/cm
3) Use no more than
Front 250 kPa (2.5 kgf/cm
Rear 250 kPa (2.5 kgf/cm
When seating the tire beads. Higher
pressures may cause the tire to burst.
Inflate the tires very slowly and care-
fully. Fast inflation could cause the tire
to burst.
MAXIMUM LOADING LIMIT
1) Vehicle load limits: 165 kg (364 lb)*
*Total weight of cargo, rider, and
accessories.
3 - 35
INSP
ADJ
Size Type
TRAIL
AT22 × 7-10
WOLF
AT22 × 7-10 KT701
TRAIL
AT22 × 10-10
WOLF
AT22 × 10-10 KT705
2
, 2.8 psi)
2
, 3.6 psi)
2
, 2.4 psi)
2
, 3.1 psi)
2
, 36 psi)
2
, 36 psi)
3