Yamaha YFM250XL(C) Service Manual page 51

Î Route the carburetor overflow hose between
the engine and upper rear engine mount and
then between the engine and swingarm.
Make sure that the hose is not pinched.
‰ Bend the cable guide after routing the
cables.
Ï Fasten the starter motor lead and wire har-
ness to the frame with the plastic clamp.
CABLE ROUTING
Ì Route the rear brake cable and rear brake
breather hose through the cable guide.
Ó 10 mm (0.4 in)
È 100 mm (4.0 in)
Ô 40 ~ 50 mm (1.6 ~ 2.0 in)
2 - 27
SPEC
2