Installation - Yamaha YFM250XL(C) Service Manual

7
REAR WHEELS/REAR BRAKE AND REAR AXLE

INSTALLATION

Reverse the "REMOVAL" procedures.
Note the following points.
1.Lubricate:
Oil seal lip 1 (rear axle)
Bearings 2 (rear axle)
Axle spline (rear axle)
Lithium-soap base grease
2.Install:
Rear axle 1
NOTE:
Before installing the rear axle, loosen all the
bolts on the final gear case 2. Hold the rear
axle 1 with your hand, and slide it into the
ring gear spline on the final gear case. Tap
lightly on the left end rear axle with a soft
hammer.
CAUTION:
Never directly tap the axle end with a ham-
mer, this will result in damage to the axle
thread and spline.
3.Install:
Washer
O-ring
4.Lubricate:
Brake camshaft 1
Lithium-soap base grease
7 - 16
CHAS