Yamaha YFM250XL(C) Service Manual page 235

FRONT WHEELS AND FRONT BRAKE
7 - 7
4.Install:
Brake shoes
WARNING
Do not apply grease to the brake shoe lin-
ings.
5.Connect:
Front brake breather hose
Brake cable (to brake shoe plate)
6.Install:
Circlip 1
Spring 2
Washer (C-type) 3
Spring 4
Pin 5
Adjuster 6
7.Install:
Brake drum 1
Spacer collar 2
Plain washer 3
Axle nut 4
Axle nut:
70 Nm (7.0 m • kg, 50 ft • lb)
8.Install:
Cotter pin 1
NOTE:
Do not loosen the wheel hub nut after
torque tightening. If the wheel hub nut
groove is not aligned with the cotter pin
hole, align groove with the hole by tighten-
ing up on the wheel hub nut.
WARNING
Always use a new cotter pin.
CHAS
7