Installation - Yamaha YFM250XL(C) Service Manual

7
FRONT WHEELS AND FRONT BRAKE
7 - 6

INSTALLATION

Reverse the "REMOVAL" procedure.
Note the following points.
1.Lubricate:
Oil seal lips 1
Bearings 2
Camshaft 3
Pivot pin 4
O-ring 5
Lithium-soap base grease
CAUTION:
Install the camshaft and the pivot pin
lightly greased. Wipe off the excess grease.
2.Install:
Pivot pin 1
Brake camshaft holder 2
Pivot pin bolt 3:
10 Nm (1.0 m • kg, 7.2 ft • lb)
Brake camshaft holder bolt 4:
10 Nm (1.0 m • kg, 7.2 ft • lb)
3.Install:
Brake camshaft 1
Wear indicator plate 2
Brake camshaft lever 3
NOTE:
When installing the wear indicator plate
2 to the brake camshaft 1 align the pro-
jection a on the wear indicator plate with
the slot b on the brake camshaft.
Align the punched mark c on the brake
camshaft 1 with the punched mark d on
the brake camshaft lever 3.
Brake camshaft lever:
9 Nm (0.9 m • kg, 6.5 ft • lb)
CHAS