Disassembly - Yamaha YFM250XL(C) Service Manual

FINAL DRIVE GEAR AND DRIVE SHAFT
6 - 29
NOTE:
When the final gear case until is removed
from the swingarm, the drive shaft 3 may
fall off.
Be careful not to lose these parts.

DISASSEMBLY

1.Remove:
Bolts 1 (8 mm)
Bolts 2 (10 mm)
NOTE:
Working in a crisscross pattern, loosen bolt
1/4 turn each. Remove them after all loos-
ened.
2.Remove:
Bearing housing 1
Shim(s) 2
Ring gear 3
Thrust washer 4
DRIV
6