Yamaha YFM250XL(C) Service Manual page 97

HEADLIGHT BULB REPLACEMENT
5.Remove:
Keep flammable products or your hands
away from the bulb while it is on, it will be
hot. Do not touch the bulb until it cools
down.
6.Install:
NOTE:
Make sure the projection 2 on the bulb is
meshed with the slot 3 on the light case.
Avoid touching glass part of bulb. Also
keep it free from oil otherwise, transpar-
ency of glass, bulb life and illuminous flux
will be adversely affected. If oil gets on
bulb, clean it with a cloth moistened thor-
oughly with alcohol or lacquer thinner.
7.Connect:
NOTE:
Make sure the projections on the bulb
holder are meshed with the slots on the
light case.
8.Set the bulb cover to the bulb holder.
9.Install:
NOTE:
Securely install the rubber grommet of the
head light lead to the head light cover.
10.Connect:
11.Adjust:
3 - 43
Bulb 1
WARNING
Bulb 1 (new)
CAUTION:
Bulb holder 1
Headlight unit
Headlight lead couplers
Headlight beam
Refer to "HEADLIGHT BEAM ADJUST-
MENT" section.
INSP
ADJ
3