Yamaha YFM250XL(C) Service Manual page 173

ENGINE ASSEMBLY AND ADJUSTMENT
11.Install:
Spring 1
Footrest 2 (right)
Bolt (footrest):
65 Nm (6.5 m • kg, 47 ft • lb)
12.Install:
Front fender stay 1
Sift pedal 2
Footrest 3 (left)
Bolt (shift pedal):
10 Nm (1.0 m • kg, 7.2 ft • lb)
Bolt (footrest):
65 Nm (6.5 m • kg, 47 ft • lb)
Bolt (footrest plate):
30 Nm (3.0 m • kg, 22 ft • lb)
NOTE:
The center of the shift pedal 2 should be
aligned with the top of the footrest 3.
13.Connect:
Brake cable 1 (rear)
Brake pedal rod 2
14.Adjust:
Rear brake
Refer to the "REAR BRAKE LEVER AND
PEDAL ADJUSTMENT" section in CHAP-
TER 3.
15.Install:
Starter motor 1
Bracket 2 (starter motor)
NOTE:
Before installing the starter motor, apply
the grease to the O-ring.
Bracket (starter motor):
7 Nm (0.7 m • kg, 5.1 ft • lb)
16.Connect:
Starter motor lead 3
4 - 75
ENG
4