Disassembly - Yamaha YFM250XL(C) Service Manual

MIDDLE GEAR SERVICE
3.Remove:
Bearing retainers 1
Use a #40 Torx Driver.
4.Remove:
Bearing 1
Shim 2

DISASSEMBLY

Middle driven shaft
1.Remove:
Universal joint
*********************************
Removal steps:
Remove the circlips 1.
Place the U-joint in a press.
With a suitable diameter pipe beneath the
yoke, press the bearing into the pipe as
shown.
NOTE:
It may be necessary to lightly tap the yoke
with a punch.
Repeat the steps for the opposite bearing.
Remove the yoke and U-joint 2.
NOTE:
It may be necessary to lightly tap the yoke
with a punch.
*********************************
2.Remove:
Nut 1 (U-joint)
Washer 2
U-joint 3
NOTE:
Hold the U-joint 3 by the Universal Joint
Holder 4 and Attachment 5 to loosen the nut.
6 - 5
DRIV
6