Engine Case Assembly - Honda Gold Wing GL1200D Shop Manual

TRANSMISSION/SHIFT LINKAGE
ENGINE CASE ASSEMBLY
Make sure that the piston ring end gaps are stagger-
ed 3sshown in Page 11-15.
Compress the piston fing with the piston sliders.
Align the tops of the No.2 and 4 pistons and install
the Piston Bases between the pistons and crank
webs.
Place the Engine Case Assembly Guides on the
engine case as shown.
Coat the cylinders, pistons. and piston rings/grooves
with oil. Lower the case until it rests on the guides.
Remove the piston bases and guides.
Apply sealant to the case mating surfaces.
NOTE:
Be sure to apply sealant to where the cases
are mated.
Install the dowel pins.
Make sure that the oil strainer screen is in its correct
position.
PISTON SLIDERS
07955-MG90000
DOWEL PIN
Q\HONDA
~GLI200D'GL1200A ~
ENGINE CASE ASSEMBLY
GUIDE 07973-3710000
DOWEL PIN
Engage the shift arl1l with the shift drum and seat
the cases.
1 0-24
;:".~ii~~,S=H~IFT
ARM