Float Chamber Removal - Honda Gold Wing GL1200D Shop Manual

FUEL SYSTEM
Push the jet needle holder in and turn
it
60 degrees
with an screwdriver. Then remove the jet needle
holder, spring and jet needle from the piston.
CiJ\aoNDA
~GL1200D'GL1200A
JET NEEDLE HOLDER
Inspect the jet needle for excessive wear at the tip
and for bending, or other damage.
FLOAT CHAMBER REMOVAL
Remove the float chamber body.
Pull out the float arm_ pin with a pair of pliers,
Remove the float and float valve.
4-8
VACUUM PISTON
/ )
JET NEEDLE SPRING
,........
~F:rL,OAT
FLOAT ARM PIN
JET NEEDLE
HOLDER
FLOAT VALVE