Engine Case Separation - Honda Gold Wing GL1200D Shop Manual

r::iif\
HONDA
~
GL1200D- GL1200A
ENGINE CASE SEPARATION
Remove the engine from the frame (Section 5).
Turn the crankshaft clockwise to bring the No.1
piston at TDe on the compression stroke.
Remove the timing belt (Page 7·3).
Turn the crankshaft 90
0
further from the above
position.
Remove the starter motor.
Remove the following parts:
• Right and left cylinder heads.
• Thermostat housing.
• Front engine cover.
• Clutch outer.
• Output shaft.
• Pulse generator drive shaft.
NOTE:
The engine case halves can be separated with-
out removing the alternator drive shah.
Remove the oil pipe from the engine cases.
TRANSMISSION/SHIFT LINKAGE
STARTER MOTOR
MOUNT BOLTS
10-9