Piston O.d. Inspection; Cylinder I.d. Inspection - Honda Gold Wing GL1200D Shop Manual

CLUTCH
PISTON 0.0. INSPECTION
Check the piston for scoring or scratches.
Measure the outside diameter of the piston with a
micrometer.
SERViCE LIMIT: 33.52 mm (1.320 in)
CYLINDER 1.0. INSPECTION
~HONDA
~GL1200D'GLI200A
Check the sla. . . . e cylinder for scoring or scratches.
Measure the inside diameter of the cylinder bore.
SERVICE LIMIT: 33.68 mm (1.326 in)
ASSEMBLY
Assembly the slave cylinder in the reverse order of
disassembly.
NOTE:
The all and plston seals must
be
replaced
with new ones whenever they have been
removed.
Apply brake fluid to the piston and piston
seal.
Be certain the piston seal is seated in the
piston groove. Place the piston in the
cylinder with the oil seal end facing out.
8-8
SLAVE CYLINDER
•
•
OIL SEAL
~
PISTON
•