TRANSMISSION/SHIFT LINKAGE
Inspect the shift spindle and shift arm for wear,
damage or bending.
Inspect the shift arm spring and return spring for
weakness or signs of damage.
Replace the shift arm or spindle if there is excessive
shift lever movement before the shaft starts to
rotate.
SHIFT ARM SPRING
/
I
0
~HONDA
~GL12000'GLI200A
'-'
SHIFT
~'
\
RETURN SPRING
SHIFT LINKAGE ASSEMBLY
SHIFT ARM/SPINDLE
Reinstall the shift spindle and shift arm in the
reverse order of removal. Tighten the lock bolt
to specified torque.
TORQUE: 23-27 N·m (2.3-2.7 kg·m, 17-20 ft·lb)
Bend the tab of the lock washer up against the side
of the lock bolt.
Install the gearshift pedal on the pedal shaft aligning
the punch marks.
Check operation of the shift arm.
10-4