Piston/Ring/Rod Inspection - Honda Gold Wing GL1200D Shop Manual

CRANKSHAFT/PISTON
PISTON/RING/ROD INSPECTION
Measure the 0.0. of a new piston pin at both ends.
SERVICE LIMIT: 18.98 mm (0.747 in)
Measure the piston pin hole I.D.
SERVICE LIMIT: 19.03 rnm fO.760 in)
Calculate the piston pin-to·piston clearance. Replace
the piston with a new one if the service limit is
exceeded.
SERVICE LIMIT: 0.05 rnm 10.002 in)
Clean the piston top and ring grooves. Inspect for
evidence of pitting or detrioration.
CAUTION:
Do
not use
Q
whire brnsh to clean dng
groo~'es
and lands;
Q
wire brush can damage these
areas.
Inspect the ring lands for abnormal wear and piston
thrust faces for scratches.
Inspect the pistons for cracks or other damage.
Inspect the piston ring-to-ring land clearance using
new piston rings.
SERVICE LIMIT: 0.12
mm
10.005
in)
11-4
CfiiJ\
HONDA
~GLI200D'GLl200A