Carburetor Assembly; Pilot Screw Installation - Honda Gold Wing GL1200D Shop Manual

FUEL SYSTEM
CARBURETOR ASSEMBLY
The reassembly sequence is essentially the reverse of
disassembly.
NOTE:
Do not overtighten the main jet holder and
float valve seat.
~HONDA
~GL1200D'GL1200A
PILOT SCREW INSTALLATION
Install the pilot screws and return them to their
original position as noted during removal.
CAUTION;
Damage to the pilot screw seat occurs
if
the
pilot screw is tightened against the seat.
Perform pilot screw-adjustment if new pilot screws
are installed (page 4·16).
NOTE:
If you replace the pilot screw in one carbure-
tor, you' must replace the pilot screws in the
other carburetors for proper pilot screw
adjustment.
4-12
D-RING
SPRING
WASHER
r
PILOT SCREW