Brake Calipers - Honda Gold Wing GL1200D Shop Manual

HYDRAULIC BRAKES
~HONDA
~
GL1200D·GL1200A '-'
...../I.,.;.PASSENGER FOOT REST 8
mm
BOLT
CALIPER OIL BOLT
BOLT
BOOTS
10 mm BOLTS
PIVOT PAD PIN
SOLT RETAINER BOLT
CALIPER
BOLT
SLIDE COLLAR
PAD PIN OIL BOLT
RETAINER
BOLT
Loosen the pad pin retainer bolt and front caliper
bracket lower mount bolt.
Remove the caliper by removing the caliper pivot
and caliper bolts.
Install the passenger fool rest and righten the bolts
(GL1200A).
TORQUE:
10 mm Bolt: 30-40 N·m
(3.0-4.0 kg·m. 22-29 ft·fbl
8 mm Bart: 18-25 N·m
(1.8-2.5 kg'm, 13-18 ft·lbJ
Avoid spilling brake fluid on painted surfaces
and wind screen.
BRAKE CALIPERS
Place a dean container under the caliper and dis-
connect the brake hose from the caliper.
REMOVAL
DISASSEMBLY
Remove the brake pads and pad spring.
Remove the caliper slide collar and boots.
Remove the caliper pistons.
CAUTION,
Instaillhe swing arm (Page 13-21).
Fill the brake hydraulic system with recommended
brake fluid (Page 15-4).
PISTONS PAD SPRING
15-16