Rotation Direction Limit Selection - Omron SYSDRIVE RX Series User Manual

RUN Time/Power ON Time Exceeded
•If the total RUN time of the Inverter exceeds the time set in ON time setting b034, a RUN/Power
ON 'time exceeded' (RNT/ONT) signal is output.
Parameter No. Function name
RUN time/Power ON
b034
time setting
Related functions
RUN Time Exceeded (RNT)
•Allocate 11 (RNT) to any of multi-function output terminals P1 to P5 (C021 to C025) or the relay
output terminal (C026).
•Set a time in RUN time/Power ON time setting b034.
Power ON Time Exceeded (ONT)
•Allocate 12 (ONT) to any of multi-function output terminals P1 to P5 (C021 to C025) or the relay
output terminal (C026).
•Set a time in RUN time/Power ON time setting b034.

Rotation Direction Limit Selection

•Limits motor rotation directions.
•Enabled in either "control circuit terminal block" or "Digital Operator" control mode.
•When a limited RUN command is input, the Digital Operator displays
Parameter No. Function name
Rotation direction limit
b035
selection
Data
0.: Does not operate.
1. to 9999.:
Set in increments of 10 hours.
1000 to 6553:
Set in increments of 100 hours.
(100000 to 655300 hours)
C021 to C025, C026, d016, d017
Data
00: Forward and Reverse are enabled.
01: Only Forward is enabled.
02: Only Reverse is enabled.
4-2 Function Mode
Default setting Unit
⎯
0
.
OkOkOkO
Default setting Unit
⎯
00
4-52
4