Forward Run Signal; Fatal Fault Signal - Omron SYSDRIVE RX Series User Manual

Forward Run Signal

•This signal is output while the Inverter is running forward.
•While the Inverter is running in reverse, or when stopped, this signal is turned off.
Parameter No. Function name
Multi-function output
C021 to C025
terminal selection
Relay output (MA, MB)
C026
function selection
Reverse Run Signal
•This signal is output while the Inverter is running in reverse.
•While the Inverter is running forward, or when stopped, this signal is turned off.
Parameter No. Function name
Multi-function output
C021 to C025
terminal selection
Relay output (MA, MB)
C026
function selection
Output frequency
(kHz)
Signal during
forward operation
Signal during
reverse operation

Fatal Fault Signal

Parameter No. Function name
Multi-function output
C021 to C025
terminal selection
Relay output (MA, MB)
C026
function selection
•In addition to an alarm, this signal is output if any of the following trips occurs.
Data
51: FWR (forward run signal)
Data
52: RVR (reverse run signal)
Data
53: MJA (fatal fault signal)
4-2 Function Mode
Default setting Unit
⎯
⎯
05
Default setting Unit
⎯
⎯
05
Default setting Unit
⎯
⎯
05
4-104
4