Basic Operation; Extended Operation - Canon iR1600 Service Manual

4.2 Basic Operation

Operate the machine as follows when using its basic functions:
Key to use
Zoom key
Paper Select key
Image Quality key
Light/AE/Dark key

4.3 Extended Operation

Press the Special Features key in the control panel to make use of the following func-
tions:
Items
2PG SET SETTING
MARGIN SETTING
FRAME ERASE SETTING
DOC. FRAME ERASE
BOOK FRAME ERASE Use it to delete images of the sides and middle binding width of the
HOLE PUNCH ERASE
2 ON 1 SETTING
COPYRIGHT© 2002 CANON INC.
Use it to select a default ratio or a zoom ratio (between 50% an
200%).
Use it to select a cassette as a source of paper.
Use it to select a level of image quality (text, text/photo, photo).
Use it to select a reading density (auto, F1 through F9).
T01-402-01
Use it to select page separation in book mode (to copy left and right
pages of spread book); specify open on left or right and original
size.
Use it to create a binding margin on paper. Specify the location of
margin (left, right, top, bottom) and the margin width (1 to 20 mm).
Use it to specify the location of frame erasing.
Use it to select frame erasing of the original.
original (e.g., book).
Use it to delete the image, if any, of holes in the original (on the left
side) so that the copies will not show them.
Use it to enter an original size and paper size; then to select 2-on-1
or 4-on-1 copying mode.
T01-403-01
2000 CANON iR1600/iR2000 REV.1 JAN 2002
CHAPTER 1 INTRODUCTION
Description
Description
1-21