CHAPTER 1 INTRODUCTION
6.3 Handling the Laser Unit
When servicing the area around the machine's laser optical unit, take full care not to
put any tool with a high reflectance (e.g., screwdriver) into the laser path. Be sure also to
remove any watch, ring, or the like, as they can reflect the laser beam to damage your eye.
The machine's laser light is red, and its covers that can reflect the laser light are identified
using the following label; take special care if you must service the area behind covers to
which the label is attached. (The label is also attached on covers used to block out the laser
light.)
1-34
F01-603-01
COPYRIGHT© 2002 CANON INC.
2000
CANON iR1600/iR2000 REV.1 JAN. 2002