Canon iR1600 Service Manual page 209

5) Remove the paper.
6) Mount the fixing heater[7] with two
screws[6].
1. Be sure to mount the fixing
heater so that its edge with
print faces upward.
Further, take care not to
touch the glass portion of the
fixing heater.
2. When mounting the fixing
roller, take care not to
scratch it by any of the sepa-
ration claws.
7) Prepare a length of paper [8] (plain pa-
per) cut to a width of about 20 mm.
8) Put the length of paper [8] between the
thermistor [9] and the fixing roller [10]
then, check to make user that the ther-
mistor [9] is in firm contact with the fix-
ing roller [10].
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 7 FIXING SYSTEM
[7]
[7]
F07-306-04
Front View
[9]
F07-306-05
Cross Section
[8]
[9]
F07-306-06
[6]
[8]
[10]
[10]
7-25