Rom Indication (#13 Rom); Resetting The Cs Unit Position (#14 Cs Set) - Canon iR1600 Service Manual

5.4.11 ROM Indication (#13 ROM)

The following items/settings may be sued in ROM indication mode:
Item
MAIN
MAIN2
ECONT
PDL
NIC
FIN
NCR

5.4.12 Resetting the CS Unit Position (#14 CS SET)

When you execute this mode, the CS unit moves to its position used at time of shipment.
You may move the CS unit to a position where it is to be secured (right side) with the CS
fixing screw.
COPYRIGHT© 2002 CANON INC.
Use it to indicate the version of the ROM on the image processor PCB.
Use it to indicate the version of the CPU on the image processor PCB.
Use it to indicate the version of the ROM on the DC controller PCB.
Use it to indicate the version of the printer board.
Use it to indicate the version of the ROM on the network interface board.
Use it to indicate the version of the ROM on the finisher controller PCB.
Use it to indicate the version of the ROM on the card reader.
2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 13 TROUBLESHOOTING
Description
13-93