Pickup Assembly - Canon iR1600 Service Manual

3.5.2 Pickup Assembly

Machine state
1) Do the pickup roller of the selected paper source (cassette, manual
NO:
Cassette
2) Is the cassette fitted correctly?
NO:
Cassette
3) Try a different cassette. Is the fault correct?
YES: Check the faulty cassette.
Paper
4) Is the paper curled or wavy?
YES: Replace the paper. Advise the user on the correct method of storing
Paper
5) Try paper of a type recommended. Is the fault corrected?
NO:
Roller
6) Is the surface of the pickup roller of the cassette and manual feed
YES: Check the sensor lever of the retry sensor (PS152) and registration
NO:
COPYRIGHT© 2002 CANON INC.
feed tray) and the feed roller of the cassette rotate during print-
ing?
See "Pickup operation fails" for each source of paper.
Is the paper size lever set correctly?
Correct the fault.
paper.
Advise the user to use recommeded paper.
tray and the feeding roller of the cassette normal?
paper sensor (PS101).
Clean the rollers. If damage/deformation is found, replace it.
2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 13 TROUBLESHOOTING
13-49