Canon iR1600 Service Manual page 153

3. When the feeding roller drive gear and
the feeding roller shaft gear engage, the
drive reaches the feeding roller shaft
gear to rotate the feeding roller.
4. When the pickup roller makes a single
rotation, the area of the pickup roller
drive without a tooth will be located at
the relay gear, preventing the drive of
the main motor from reaching the
pickup roller and the feeding roller,
stopping both rollers.
5. After pickup, the paper is moved under
the vertical path roller and then to the
registration roller assembly.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 6 PICKUP/FEDING SYSTEM
Feeding roller
drive gear
F06-201-04
Feeding roller
shaft gear
6-5