Canon iR1600 Service Manual page 465

11) See that some LEDs of the machine remain ON while downloading is taking place.
Do not turn off the power or disconnect the cable while downloading from
the PC is taking place. Otherwise, the ROM DIMM will no longer be us-
able, requiring replacement.
12) See that the machine re-starts automatically at the end of downloading. When [Add New
Hardware Wizard] has started up, click 'Cancel'.
13) A screen appears; check that the result is 'OK'.
Do not turn off the power even when the transfer of firmware has ended
from the PC to the machine, as the machine is likely to be deleting/writing
ROM DIMM programs. If done at the wrong timing, the programs will be
Memo
incomplete, preventing the machine from starting up.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 14 VERSION UP
14-15